Today on The Skid Factory, Al & Woody Pickup their new project car that's receiving a Skid Factory overhaul. Scott's car has been used as a Sunday driver for over 10 years and Al has always had his eye on it. The time has come to treat it to a new heart so the old Red motor is removed and the freshly built iron lion is fitted in place.

Today on The Skid Factory, Al & Woody continue work on Scott's HJ Kingswood Wagon. A New Hughes Performance TH700 Gearbox is fitted up along with modifying some Subaru cooling fans to bolt onto the WB Statesman radiator.

Today on The Skid Factory, Al & Woody head down to see their​ mates at Noosa Radiators to assemble a new Harrop Engineering Torsen Centre into the BTR78 Differential and also rebuild a set of AU Falcon Brake calipers.

Today on The Skid Factory, Scotts HJ Kingswood wagon receives all-new suspension bushes along with installing the BTR78 Differential. Al & Woody then install a Hopper Stoppers Brake upgrade kit on the front of the car after cleaning off 40 years of ball joint grease.

Today on The Skid Factory, The Kingswood gets a Hughes Performance Transmission cooler fitted up along with a set of pacemaker Extractors. Al then jumps onto the lathe to make up a custom pulley for the handbrake mechanism​.

Today on The Skid Factory, AL and Woody continue work on Ted Bullpitt with some help from Budget Thor. The Body mounts are replaced with some new items supplied by Resto Country along with fitting the wiring loom so that we can hit the key to test the starter motor and get some oil circulating throughout the engine!

Today on The Skid Factory, The Kingswood gets a new set of BCI wheels that have been fitted up with some fresh tyres, An EFI Fuel tank from a Holden Commodre thats been modified to suit and all the fuel lines replaced along with a new Go Fast Bits Fuel Pressure Regulator! Theres also a little teaser for one of our future projects!

Today on The Skid Factory, Al finishes off the exhaust and sets up the column shift to work with our @Hughes Performance TH700 Gearbox. We then set up the @Haltech Elite 950 and set the ignition timing before firing the Iron Lion Into Life!!

Today on The Skid Factory, Al and Woody go and visit The Hoff and Wendy from@Nugget Garage to get the Iron Lion Tuned! We then hop in the car and go for a Saturday Cruise on the streets to enjoy the car.