Today on The Skid Factory We've Teamed up with Benny from Benny's Custom Works and start on a build for Hot Rod Drag Week 2019.

Today on The Skid Factory we're back down at MPW Performance fabricating some intercooler pipes and wiring the Engine on the Foxbody Mustang. It's then taken apart so that all of our pre fabricated parts can be shipped to the USA!

Today on The Skid Factory We're In the USA Baby! Al, Woody and Benny have flown across the Pacific and across the USA to meet up with their mates at Charleston Performance Solutions who have picked up the Donor Foxbody Mustang thats going to receive the Barra transplant. Benny has undergone months and months of planning for the build and has had all of the previous fabricated parts plus a heap of goodies from Hughes Transmissions sent to the workshop so they can get stuck straight into it! Huge thanks to Matt, Jody Chicken Twisty Jr, Nick and Mikey at CPS for being a huge part of this build and letting us use the workshop space. John and Bill at Nth degree Fabrications for all of their epic efforts helping us out and fabricating an epic side pipe, Sean from Fox Fabrications for giving the Differential a freshen up and helping out along the way and Anyone else included that chipped in during the build!

Today on The Skid Factory, We're at Charleston Performance Solutions chipping away at the Barra Foxbody Conversion. The EFI Fuel cell is installed in the boot along with plumbing up the fuel feed, return and flex fuel sensor lines.

Today on The Skid Factory , Al finishes off majority of the wiring on the Barra powered Foxbody and Benny takes delivery of the Cresta after its been shipped from Sydney which is full of specialty tools and spare parts.

Today on The Skid Factory we get the Foxbody Mustang up and running and head down to see our mates John and Bill at Nth Degree Fabrication to get the exhaust out the guard and also fab up some air ducts for the intercooler in the front bumper.

Today on The Skid Factory, The Barra Powered Foxbody is strapped onto the dyno before we hit the road on-route to Virginia for the start of Hotrod Dragweek 2019. We only make it 10 Miles until uncle Rodney decided to come knocking but luckily our mate Robby Abbott organized for us to head up to Moorseville NC to Harrell Engine & Dyno so we could rebuild an engine.