This Hand Drill machine was made by VAL D'OR in France
was in very bad condition with a missing handle
the first time I started with disassembling the pieces
then I started cleaning the pieces with
grinding drums with metal wire
That took me about 5 hours of hard work
after I made the missing handle from a piece of wood found through the workshop.
to make the wood more resistant I used parquet flooring.
After grinding the pieces I used alcohol for degreasing.
For painting I used a pre-loaded spray with a metallic gray paint, special paint for car rims, I applied four coats of paint.
For the central part I used a black anti-rust paint.
After 24 hours I started assembling the pieces.
